Grease Monkeys NZ

A Site for Garage Built Custom Motorcycles with that Vintage Vibe
 
HomeHome  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 
 

 Flex J without the flex

View previous topic View next topic Go down 
AuthorMessage
batesclan



Posts : 2
Join date : 2014-07-01

PostSubject: Flex J without the flex   Tue Jul 01, 2014 9:12 pm

" />
Back to top Go down
View user profile
Irishjon
Admin


Posts : 1360
Join date : 2009-11-04
Age : 60
Location : Auckland

PostSubject: Re: Flex J without the flex   Wed Jul 02, 2014 12:12 pm

So what's the plan?

_________________
IRISHJON
Serial Bike Abuser
Back to top Go down
View user profile http://www.greasemonkeys.co.nz
batesclan



Posts : 2
Join date : 2014-07-01

PostSubject: Re: Flex J without the flex   Wed Jul 02, 2014 8:24 pm

Has a FZR1000 front end and VFR single sided swiingarm.

Left to do is a spacer to bring wheel into alingment with front and then paint.

Has been an ongoing project for a few years.

With the front end change handled much better. Have not ridden with rear change yet.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Flex J without the flex   Today at 11:07 am

Back to top Go down
 
Flex J without the flex
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Notes on shaft properties - flex torque, kick-point ...
» Is there "A" Flex for iron/steel shaft?
» flex machine
» When to change shaft flex?
» How to know the flex for Project X?

Permissions in this forum:You cannot reply to topics in this forum
Grease Monkeys NZ :: The Build Files :: Project files-
Jump to: